It can be annoying when your wireless connection keeps dropping while accessing the Linksys router setup wizard page. However, there can be several reasons behind internet connection that occasionally drop off. There are a few tricks that you can use to get your Wi-Fi connection back up and running. Check out this article to find easy and simple troubleshooting tips to fix Linksys router Wi-Fi issues.
The most common reasons behind a weak or slow internet are physical obstructions, low-quality network, outdated firmware, loose connections, or more. First, check if the problem is with your computer or router. Try to access the Wi-Fi network on another wireless device. If this device is getting a proper wireless network then you have to check the wireless settings of your first device.
If all of your wireless devices are unable to connect to the network, it means the problem is with the Linksys router. In such a situation, you will have to configure Linksys smart wifi router again and update its firmware.
Follow the below troubleshooting tips to fix the intermittent wireless connection:
Adjust the MTU Size:
MTU implies the largest packet size that allows the transmission of the internet. You will have to adjust the proper MTU size to get the most efficient wireless network on your devices.
Adjust the Router’s Channels:
Your network might be dropping due to wireless interference. Make sure the router is not operated on the same frequency as other electronic devices. You should change the channel of the Linksys router to either 1 or 11.
Minimize Physical Obstructions:
Another reason can be physical obstacles such as walls, ceiling, etc. Try to find an ideal location to place your Linksys wireless router. It is advised to keep your wifi router away from metal objects. Also, move your wireless devices closer to the router.
Re-Configure the Linksys Wireless Settings
Make sure to change the wireless name and password of your Linksys wifi router. Always keep a strong and more complex password to prevent unauthorized access. Try to set up the security settings and choose a strong wireless encryption standard such as WPA/WPA2.
Update the Linksys router firmware
The next step to fix the intermittent connection is updating the router’s firmware. Download the latest firmware for your Linksys device from the official website. Log into the Linksys router setup wizard page and navigate through advanced settings. Select the firmware file and click on the Firmware update to start the updating process.
Reset the Linksys Router
In case, the above steps don’t work then reset the router to its factory default settings. Press and hold the reset button on the Linksys wifi router with a paper clip. After a few seconds, release the button and wait for it to fully restart.